Reset Drum Dell 1710, 1710DN
1 - Shut off the printer.2 - Hold down the "Continue" button while opening the front door. Then turn on the printer.3 - Keep the Continue button held down until only the "Error LED" is on then release the button. Close the door.4 - The Continue button, Ready/Data, Toner Low, and Load Paper LEDs should all be lit up.5 - Press "Cancel" a few times to cycle through the LEDs until just the "Toner Low LED" is lit.6 - Press and hold the "Continue" button until the LEDs cycle through and release only when the LED stops at Toner Low.7 - Turn the printer off and back on.